Description
GAT562 30S T9 off-grid mesh handheld with a physical T9 keypad, 1.3-inch OLED, L76K GNSS, built-in BMP280 temperature and barometric pressure sensor, 2,500 mAh battery, independently controlled red laser at the top-left corner, and direct MTools BLE OTA. Choose US915.
BUILT FOR THE FIELD
Physical control, location and environmental awareness
When a touchscreen is inconvenient or mobile coverage disappears, the T9 keeps essential interaction on the device itself.
01 · INPUT
Type directly on the handheld
Use the T9 keypad, directional pad, function keys, and 128 × 64 OLED for basic on-device navigation and messages.
02 · POSITIONING
GNSS built in
The L76K GNSS module and internal GNSS antenna support location-aware operation when satellite reception is available.
03 · RADIO
Designed for mesh networks
GAT562 30S radio hardware offers up to 30 dBm+ transmit power and -136 dBm receiver sensitivity, with a replaceable external whip antenna.
04 · ENVIRONMENT
BMP280 sensor built in
Check ambient temperature and barometric pressure from the handheld to add local environmental context to outdoor decisions.
APPLICATIONS
Useful beyond cellular coverage
Bring the T9 hiking, camping, overlanding, or to a temporary field site. A compatible mesh can relay traffic through other nodes; actual reach depends on terrain, placement, antenna, settings, interference, and local radio rules.

ON THE TRAIL
Keep a hiking party in touch
Enter short messages directly on the T9 while your phone stays packed away. GNSS can add location context, and nearby compatible nodes can extend a local mesh.
Illustrative outdoor scene. Communication requires reachable compatible nodes.
AT CAMP
A dedicated tool beside the map
Coordinate a campsite, outdoor team, or community mesh with a display and keypad ready for quick use. Check the built-in BMP280 for local temperature and barometric pressure readings as conditions change. Choose the EU868 or US915 variant to match your region and neighboring nodes.
Illustrative outdoor scene. Always follow local frequency regulations.


DEDICATED RED LASER CONTROL
A visible point for signaling after dark
The independently controlled red laser emitter sits at the top-left corner of the device. Aim that corner toward the target to place a red point where you intend. The image is an illustrative outdoor scene; visibility depends on distance, surface, lighting, and conditions.
Use the laser as one part of a wider emergency plan. It does not replace a certified emergency beacon or guarantee rescue. Never aim a laser toward people, vehicles, or aircraft.
FIRMWARE & OTA
Update directly with MTools BLE
The T9 supports Bluetooth Low Energy over-the-air firmware updates. In MTools BLE, choose the GAT562 T9, select the matching firmware, and complete DFU without a USB cable. Keep the battery charged throughout the update.
The MTools Meshtastic firmware source and releases are public. The hardware specification also lists Meshtastic, MeshCore, and APRS support; available features depend on the installed build, and only one firmware runs at a time.


TECHNICAL DETAILS
GAT562 30S T9 specifications
| Frequency options | EU868 or US915 |
| Radio module | GAT562 30S Mesh Module |
| TX power / RX sensitivity | 30 dBm+ / -136 dBm |
| GNSS | L76K with internal antenna |
| Environmental sensor | Built-in BMP280 for ambient temperature and barometric pressure |
| Display | 1.3-inch 128 × 64 OLED |
| Battery | Built-in 2,500 mAh rechargeable lithium |
| Charging | USB-C, 5 V / 2 A input |
| External antenna | 2.0 dBi whip antenna |
| Body size | 92 × 47 × 30 mm, excluding antenna and loop |
| Weight | Approximately 65 g with battery and short antenna |
| Stated runtime | GPS on: 3–4 days; GPS off: 8–10 days |
Runtime estimates vary with firmware, settings, radio traffic, and use.

IN THE BOX
Ready to take outdoors
- GAT562 30S T9 handheld × 1
- Whip antenna × 1
- USB data cable × 1
Fully charge the battery and attach the matching antenna before transmitting. Choose the legal regional frequency setting for your location.
Explore the related GAT562 30S Kit and other LoRa nodes to expand your network.





Reviews
There are no reviews yet.