})();
Welcome to SNEAKTECH, One Stop Shop For All Your Gaming Needs!
GAT562 30S T9 Mesh Handheld with GNSS & BLE OTA(EU868)

$110.00

Description

GAT562 30S T9 off-grid mesh handheld with a physical T9 keypad, 1.3-inch OLED, L76K GNSS, built-in BMP280 temperature and barometric pressure sensor, 2,500 mAh battery, independently controlled red laser at the top-left corner, and direct MTools BLE OTA. Choose EU868.

 

BUILT FOR THE FIELD

Physical control, location and environmental awareness

When a touchscreen is inconvenient or mobile coverage disappears, the T9 keeps essential interaction on the device itself.

01 · INPUT

Type directly on the handheld

Use the T9 keypad, directional pad, function keys, and 128 × 64 OLED for basic on-device navigation and messages.

02 · POSITIONING

GNSS built in

The L76K GNSS module and internal GNSS antenna support location-aware operation when satellite reception is available.

03 · RADIO

Designed for mesh networks

GAT562 30S radio hardware offers up to 30 dBm+ transmit power and -136 dBm receiver sensitivity, with a replaceable external whip antenna.

04 · ENVIRONMENT

BMP280 sensor built in

Check ambient temperature and barometric pressure from the handheld to add local environmental context to outdoor decisions.

APPLICATIONS

Useful beyond cellular coverage

Bring the T9 hiking, camping, overlanding, or to a temporary field site. A compatible mesh can relay traffic through other nodes; actual reach depends on terrain, placement, antenna, settings, interference, and local radio rules.

Illustrative GAT562 30S T9 mountain trail use

ON THE TRAIL

Keep a hiking party in touch

Enter short messages directly on the T9 while your phone stays packed away. GNSS can add location context, and nearby compatible nodes can extend a local mesh.

Illustrative outdoor scene. Communication requires reachable compatible nodes.

AT CAMP

A dedicated tool beside the map

Coordinate a campsite, outdoor team, or community mesh with a display and keypad ready for quick use. Check the built-in BMP280 for local temperature and barometric pressure readings as conditions change. Choose the EU868 or US915 variant to match your region and neighboring nodes.

Illustrative outdoor scene. Always follow local frequency regulations.

Illustrative GAT562 30S T9 field coordination scene
Illustrative night scene: red laser from the T9 top-left emitter reaches a rock at right angles to the device

DEDICATED RED LASER CONTROL

A visible point for signaling after dark

The independently controlled red laser emitter sits at the top-left corner of the device. Aim that corner toward the target to place a red point where you intend. The image is an illustrative outdoor scene; visibility depends on distance, surface, lighting, and conditions.

Use the laser as one part of a wider emergency plan. It does not replace a certified emergency beacon or guarantee rescue. Never aim a laser toward people, vehicles, or aircraft.

FIRMWARE & OTA

Update directly with MTools BLE

The T9 supports Bluetooth Low Energy over-the-air firmware updates. In MTools BLE, choose the GAT562 T9, select the matching firmware, and complete DFU without a USB cable. Keep the battery charged throughout the update.

The MTools Meshtastic firmware source and releases are public. The hardware specification also lists Meshtastic, MeshCore, and APRS support; available features depend on the installed build, and only one firmware runs at a time.

View Firmware Source

MTools BLE completing GAT562 T9 firmware OTA update
GAT562 30S T9 rear and side on white

TECHNICAL DETAILS

GAT562 30S T9 specifications

Frequency options EU868 or US915
Radio module GAT562 30S Mesh Module
TX power / RX sensitivity 30 dBm+ / -136 dBm
GNSS L76K with internal antenna
Environmental sensor Built-in BMP280 for ambient temperature and barometric pressure
Display 1.3-inch 128 × 64 OLED
Battery Built-in 2,500 mAh rechargeable lithium
Charging USB-C, 5 V / 2 A input
External antenna 2.0 dBi whip antenna
Body size 92 × 47 × 30 mm, excluding antenna and loop
Weight Approximately 65 g with battery and short antenna
Stated runtime GPS on: 3–4 days; GPS off: 8–10 days

Runtime estimates vary with firmware, settings, radio traffic, and use.

GAT562 30S T9 front and side on white

IN THE BOX

Ready to take outdoors

  • GAT562 30S T9 handheld × 1
  • Whip antenna × 1
  • USB data cable × 1

Fully charge the battery and attach the matching antenna before transmitting. Choose the legal regional frequency setting for your location.

Explore the related GAT562 30S Kit and other LoRa nodes to expand your network.

Reviews

There are no reviews yet.

Be the first to review “GAT562 30S T9 Mesh Handheld with GNSS & BLE OTA(EU868)”

Your email address will not be published. Required fields are marked *

Related

Related Products